Tony Angelo ( @tangelo96 ) Instagram Profile

tangelo96

Tony Angelo

CAR GUY.
Tony@tangeloracing.com

  • 1.7k posts
  • 185.4k followers
  • 880 following

Tony Angelo Profile Information

  • Who wore it better?? The #twinpala or the Ferrari F40?? (Swipe right). We took a little inspiration from one of the raddest cars of all time. @swracecars cut us a killer lexan rear window on their water jet and this whole build just got way more badass. It’s near 2am and we are thrashing but I have faith we are gonna hit the strip tomorrow night with a beast.
  • Who wore it better?? The #twinpala or the Ferrari F40?? (Swipe right). We took a little inspiration from one of the raddest cars of all time. @swracecars cut us a killer lexan rear window on their water jet and this whole build just got way more badass. It’s near 2am and we are thrashing but I have faith we are gonna hit the strip tomorrow night with a beast.
  •  8,352  117  12 July, 2019
  • #twinpala getting it done over here at @freedommotorsportz. POWER! 550wheel torque, 420 wheel hp! EDIT REAR Engine made 450 WHP. So that should put us around 975-1000 FLYWHEEL HP with both engines! We have been told anything over 450 crank HP is gonna kill these transmissions, so we made just a bit more than that 🤷🏼‍♂️. Stock headgaskets, stock cam, stock everything besides @ststurbo, big fuel and @gearstarpro built 4t65es! We are planning on going to @maplegrove1320 tomorrow night to see just what this thing will do. #letsparty
  • #twinpala getting it done over here at @freedommotorsportz. POWER! 550wheel torque, 420 wheel hp! EDIT REAR Engine made 450 WHP. So that should put us around 975-1000 FLYWHEEL HP with both engines! We have been told anything over 450 crank HP is gonna kill these transmissions, so we made just a bit more than that 🤷🏼‍♂️. Stock headgaskets, stock cam, stock everything besides @ststurbo, big fuel and @gearstarpro built 4t65es! We are planning on going to @maplegrove1320 tomorrow night to see just what this thing will do. #letsparty
  •  5,112  135  11 July, 2019
  • Behold! Full twin (one per engine) turbo setup for the #twinpala V2! A single T04 per 5.3 engine from @ststurbo and we are going to keep it mild this time so we the goal is 1000 hp between the 2 V8s. This is probably the closest I’m going to get to flying a spaceship. It’s on the dyno now @freedommotorsportz and we are gonna get wild. We are only ready to tune because of the huge efforts of some local bros burning the midnight oil. @colinwolf323 @69camaros @rob.parsons.142 all helped a ton. Ok, What are your HP/TQ GUESSES?  Front, rear and total!
  • Behold! Full twin (one per engine) turbo setup for the #twinpala V2! A single T04 per 5.3 engine from @ststurbo and we are going to keep it mild this time so we the goal is 1000 hp between the 2 V8s. This is probably the closest I’m going to get to flying a spaceship. It’s on the dyno now @freedommotorsportz and we are gonna get wild. We are only ready to tune because of the huge efforts of some local bros burning the midnight oil. @colinwolf323 @69camaros @rob.parsons.142 all helped a ton. Ok, What are your HP/TQ GUESSES? Front, rear and total!
  •  7,705  173  10 July, 2019
  • After a long week of getting grimy in the shop, I had the S10 running like a beast and it was time to hit the road but I realized that I looked like a wreck. I had to bust out a proper 80’s creeper look to go with this little truck. I got my hands on some @dollarshaveclub products and went nuts. Honestly, I had no idea that these dudes make so much more than just razors and shaving products. Yes, I got a perfect horshoe cut with the executive razor and butter. I was able to walk into the shop bathroom looking like a vagrant, and come out looking like a guy who lives at the YMCA, in a good way! 
Facial Cleanser, Hair pomade, toothpaste, body wash, butt wipes -- they have you covered from head to toe! It’s all really good stuff, but what I really liked the best was this Good Shake hand cream. My hands were trashed from the tight confines of the S10 engine bay, but this stuff fixed me right up. I’m ready to get handsy with the best of em! Join the Club with one of their Starter Sets for just $5. After that, the restock box ships regular-sized products at regular price. Clink the link in bio to get this exclusive deal! #ad
  • After a long week of getting grimy in the shop, I had the S10 running like a beast and it was time to hit the road but I realized that I looked like a wreck. I had to bust out a proper 80’s creeper look to go with this little truck. I got my hands on some @dollarshaveclub products and went nuts. Honestly, I had no idea that these dudes make so much more than just razors and shaving products. Yes, I got a perfect horshoe cut with the executive razor and butter. I was able to walk into the shop bathroom looking like a vagrant, and come out looking like a guy who lives at the YMCA, in a good way!
    Facial Cleanser, Hair pomade, toothpaste, body wash, butt wipes -- they have you covered from head to toe! It’s all really good stuff, but what I really liked the best was this Good Shake hand cream. My hands were trashed from the tight confines of the S10 engine bay, but this stuff fixed me right up. I’m ready to get handsy with the best of em! Join the Club with one of their Starter Sets for just $5. After that, the restock box ships regular-sized products at regular price. Clink the link in bio to get this exclusive deal! #ad
  •  7,841  135  8 July, 2019
  • Twinpala dissected! There’s lots going on in a twin engine car with 2 turbos, so here is the story of one part. I want a simple, elegant way to mount the turbochargers to the cage. I had @swracecars cut 3/16 flanges on their water jet. We got some .120 3/4 in tube, and @colinwolf323 welded them up. Then we drilled and tapped the other ends for 3/8 NPT, and drilled the rear cage big enough for the tubes to fit through. Once we had it positioned just right we MIG welded it all around, painted it up, installed turbo and drain fitting. Will it work? I think so? If not I can add a top brace to the boss next to the feed line, just trying to keep it nice and simple. We can still rotate both housing with this setup. Just FYI each engine is running one turbo, they are both mounted in the back and the rear engine will handle oil feed and drain for both turbos. The car is slated for tuning in a couple days then we will run it down the drags Friday!
  • Twinpala dissected! There’s lots going on in a twin engine car with 2 turbos, so here is the story of one part. I want a simple, elegant way to mount the turbochargers to the cage. I had @swracecars cut 3/16 flanges on their water jet. We got some .120 3/4 in tube, and @colinwolf323 welded them up. Then we drilled and tapped the other ends for 3/8 NPT, and drilled the rear cage big enough for the tubes to fit through. Once we had it positioned just right we MIG welded it all around, painted it up, installed turbo and drain fitting. Will it work? I think so? If not I can add a top brace to the boss next to the feed line, just trying to keep it nice and simple. We can still rotate both housing with this setup. Just FYI each engine is running one turbo, they are both mounted in the back and the rear engine will handle oil feed and drain for both turbos. The car is slated for tuning in a couple days then we will run it down the drags Friday!
  •  7,955  97  7 July, 2019
  • Happy 4th y’all! The S10 is running like a beast with that $125 dollar boat bottom end, and some hand modified Vortec heads. This truck is a dirt cheap rocketship. I’ve been driving it daily all week and I love it. Honestly this is one of the times I was totally wrong about a project. I was like S10s are lame, and the more we hopped it up the more I liked it, and now it RULES. Feels like freedom! Enjoy the holiday! #america #isthatfreedomrockwellturnitup
  • Happy 4th y’all! The S10 is running like a beast with that $125 dollar boat bottom end, and some hand modified Vortec heads. This truck is a dirt cheap rocketship. I’ve been driving it daily all week and I love it. Honestly this is one of the times I was totally wrong about a project. I was like S10s are lame, and the more we hopped it up the more I liked it, and now it RULES. Feels like freedom! Enjoy the holiday! #america #isthatfreedomrockwellturnitup
  •  8,711  118  4 July, 2019
  • #TWINPALA LIVES! Episode one is live right now! This is two years of scheming, planning and hustling to get this project made and it RULES! I just came across this pic, and I love it. Four tires tearing in different directions, smoke pouring out and a fist to the sky. 📸: @danielbyrnephotography #gotthehorsesintheback
  • #TWINPALA LIVES! Episode one is live right now! This is two years of scheming, planning and hustling to get this project made and it RULES! I just came across this pic, and I love it. Four tires tearing in different directions, smoke pouring out and a fist to the sky. 📸: @danielbyrnephotography #gotthehorsesintheback
  •  6,675  145  1 July, 2019
  • Team effort today! Trying to get the #twinpala buttoned up and ready to run, and called in @69camaros and @patrick.devlin.art for some help today. We had @colinwolf323 build a real cage for the car because at 900++ hp it might be pretty fast, and I don’t want to die. Anyway the guys helped me get the cage painted and the dash back together, so I can focus on finishing up the turbo system this week and getting car ready to hit the track. @69camaros is a local hot rod builder so hit him up if you need something done right in SE PA #wealsohadpizzaandbeer UPDATE: First #TWINPALA episode goes live TOMORROW JULY 1!!
  • Team effort today! Trying to get the #twinpala buttoned up and ready to run, and called in @69camaros and @patrick.devlin.art for some help today. We had @colinwolf323 build a real cage for the car because at 900++ hp it might be pretty fast, and I don’t want to die. Anyway the guys helped me get the cage painted and the dash back together, so I can focus on finishing up the turbo system this week and getting car ready to hit the track. @69camaros is a local hot rod builder so hit him up if you need something done right in SE PA #wealsohadpizzaandbeer UPDATE: First #TWINPALA episode goes live TOMORROW JULY 1!!
  •  4,543  32  30 June, 2019
  • WIN THIS CAR!! MALIBI Giveaway!!! Guys, you can enter to win one of the raddest HRG project cars ever! Built to be the ultimate sleeper/stunt car, there's just nothing like this thing on the road. It's one of my favorite builds of all time, and it is one of those rare cars that winds up being even more fun to drive that you imagined it would be. It's a 492HP 6.0 LS, TKO600 5speed, ford 9 9inch rare, hydraulic hand brake, off-road bump stops, full QA1 suspension and endless upgrades. 
This car is incredible, one of my best but it has to go. I've got a mountain of healthcare bills to payoff and that's way more important than holding onto this Malibu. To enter the contest, follow the link in my profile and purchase one of my new T/A 96 stickers and every one you buy is another entry! If you buy ten more stickers I’ll sign and send ya a Fishtail ‘Cuda poster. Full Description of the car plus terms and conditions are on www.tangeloracing.com
  • WIN THIS CAR!! MALIBI Giveaway!!! Guys, you can enter to win one of the raddest HRG project cars ever! Built to be the ultimate sleeper/stunt car, there's just nothing like this thing on the road. It's one of my favorite builds of all time, and it is one of those rare cars that winds up being even more fun to drive that you imagined it would be. It's a 492HP 6.0 LS, TKO600 5speed, ford 9 9inch rare, hydraulic hand brake, off-road bump stops, full QA1 suspension and endless upgrades.
    This car is incredible, one of my best but it has to go. I've got a mountain of healthcare bills to payoff and that's way more important than holding onto this Malibu. To enter the contest, follow the link in my profile and purchase one of my new T/A 96 stickers and every one you buy is another entry! If you buy ten more stickers I’ll sign and send ya a Fishtail ‘Cuda poster. Full Description of the car plus terms and conditions are on www.tangeloracing.com
  •  8,595  329  28 June, 2019
  • Ok Chevy Experts! Tell me what this short block is from? It’s 4 bolt main, has 2 dipstick holes, setup for factory roller cam, one piece rear main and I didn’t need to do any grinding to fit a dual roller chain. Ideas?? Dude says it was in a boat. Swipe for the casting number.
  • Ok Chevy Experts! Tell me what this short block is from? It’s 4 bolt main, has 2 dipstick holes, setup for factory roller cam, one piece rear main and I didn’t need to do any grinding to fit a dual roller chain. Ideas?? Dude says it was in a boat. Swipe for the casting number.
  •  6,428  240  20 June, 2019
  • Corvette is at paint! The boys at @samsautoland are getting the @dynamiccorvettes widebody dialed in and ready for paint! We haven’t had a car paint on @hotrodgarageshow is years! What color should we make this thing??
  • Corvette is at paint! The boys at @samsautoland are getting the @dynamiccorvettes widebody dialed in and ready for paint! We haven’t had a car paint on @hotrodgarageshow is years! What color should we make this thing??
  •  8,240  351  15 June, 2019