Currie Enterprises ( @CurrieEnterprises ) Instagram Profile

CurrieEnterprises

Currie Enterprises

Specializing in performance rearends for over 60 years. Whether you run on boulevards or boulders, we’ve got you covered!

  • 1.3k posts
  • 64.9k followers
  • 688 following

Currie Enterprises Profile Information

  • Check out @caseycurrie - Currently he is running the @xperiencejk "across California” with the @evo_mfg  crew. The JKX is a very unique kind of event. 
Back in 2009 Mel Wade of Off Road Evolution started a new jeep adventure called the JK-Experience because the other high profile events frowned on the new Jeep Wrangler JK models participating in their events. He wanted an event that showcased the capabilities of the new Jeep JK and JKU models while providing participants something more than an off-road event he wanted to provide an “experience!” Since that time, JK-Experience had been an annual week-long event, beginning Labor Day weekend, that most JK owners dream of participating in someday.
The premise of the event is that there are 10 sponsors and 8-10 participants who must meet stringent requirements (i.e., sport cage, minimum 37″ tires, etc.) and submit an application in the spring–crossing their fingers they get selected for the trip of a lifetime. You are notified approximately 4 weeks before the event as to the starting and ending location. Once there every day is a surprise as to where you will end up. The only thing that is not a surprise is that there is going to be hard core wheeling and some spectacular site seeing along the way.
This trip quickly became nationally known as the "JKX". Its a planned route in secrecy and all the participants know is the starting and ending location.  This is what makes the JKX so unique! It's a test of man and machine that is intended to bring out the best in both.  There are some requirements which can be read on the other page BUT a positive attitude and the ability to go with the flow and fix what you have makes the trip a lot easier for everyone. With a limited invitation of 10 guests and 10 sponsors we encourage submission of your application early. 
Currently up in the area of mono lake, and the associated areas, Casey and the crew are having a blast. Stay tuned more updates as they happen. But in the mean time, check out Casey's feed here, on Instagram and Twitter, for all the updates and stories!! #caseycurrie #currieenterprises #currieontheroad #jeep #wheeling #JKXCA  #nittotires #KMC
  • @currieenterprises Profile picture

    @currieenterprises

    Currie Enterprises

    Check out @caseycurrie - Currently he is running the @xperiencejk "across California” with the @evo_mfg crew. The JKX is a very unique kind of event.
    Back in 2009 Mel Wade of Off Road Evolution started a new jeep adventure called the JK-Experience because the other high profile events frowned on the new Jeep Wrangler JK models participating in their events. He wanted an event that showcased the capabilities of the new Jeep JK and JKU models while providing participants something more than an off-road event he wanted to provide an “experience!” Since that time, JK-Experience had been an annual week-long event, beginning Labor Day weekend, that most JK owners dream of participating in someday.
    The premise of the event is that there are 10 sponsors and 8-10 participants who must meet stringent requirements (i.e., sport cage, minimum 37″ tires, etc.) and submit an application in the spring–crossing their fingers they get selected for the trip of a lifetime. You are notified approximately 4 weeks before the event as to the starting and ending location. Once there every day is a surprise as to where you will end up. The only thing that is not a surprise is that there is going to be hard core wheeling and some spectacular site seeing along the way.
    This trip quickly became nationally known as the "JKX". Its a planned route in secrecy and all the participants know is the starting and ending location. This is what makes the JKX so unique! It's a test of man and machine that is intended to bring out the best in both. There are some requirements which can be read on the other page BUT a positive attitude and the ability to go with the flow and fix what you have makes the trip a lot easier for everyone. With a limited invitation of 10 guests and 10 sponsors we encourage submission of your application early.
    Currently up in the area of mono lake, and the associated areas, Casey and the crew are having a blast. Stay tuned more updates as they happen. But in the mean time, check out Casey's feed here, on Instagram and Twitter, for all the updates and stories!! #caseycurrie #currieenterprises #currieontheroad #jeep #wheeling #JKXCA #nittotires #KMC

  •  376  0  22 August, 2019
  • “in stock, ready to ship.” Hey gang we recently had a customer hit hard times, and bail on his order, just as his parts were headed out the door. Which leaves us with a fully dressed ready to go set of Currie extreme 60’s with no one to send them to. We need to send them to someone, so here is what you need to know: -

These are powder coated black.
Equipped with 5.38 gears *8 lug on 6.5” centers *ARB lockers 
These axles adhere to our Currie Crate axle specs. - *high pinion design. *high clearance radius bottom and center section
*low friction hardened steel skid plate- $14,800 for the set. -

We can ship these TODAY. In stock. Give our sales team a call: 714.528-6957 
So, let’s find these guys a loving, forever home. #instock #currie #jeep #etreme60 #arb #currie60’s #currieenterprises #jeep #4WD #JK
  • @currieenterprises Profile picture

    @currieenterprises

    Currie Enterprises

    “in stock, ready to ship.” Hey gang we recently had a customer hit hard times, and bail on his order, just as his parts were headed out the door. Which leaves us with a fully dressed ready to go set of Currie extreme 60’s with no one to send them to. We need to send them to someone, so here is what you need to know: -

    These are powder coated black.
    Equipped with 5.38 gears *8 lug on 6.5” centers *ARB lockers
    These axles adhere to our Currie Crate axle specs. - *high pinion design. *high clearance radius bottom and center section
    *low friction hardened steel skid plate- $14,800 for the set. -

    We can ship these TODAY. In stock. Give our sales team a call: 714.528-6957
    So, let’s find these guys a loving, forever home. #instock #currie #jeep #etreme60 #arb #currie60’s #currieenterprises #jeep #4WD #JK

  •  1,566  0  20 August, 2019
  • What is the load bolt and why do I need it?  Time for some #techtuesday! 
Well, the load bolt actually serves two purposes. First it eliminates ring gear deflection, which can be induced under moments of high torque. And, secondly it will dramatically increase your torque handling ability -

A load bolt sits two thousandths (.002) of an inch away from the rear of the ring gear (see cut away pictures, swipe to see them all). It is manufactured to high tolerances and is made from hardened tool steel and, is set to its proper position before it is shipped.

It is important to note that the load bolt is only in contact with the ring gear when the gear begins to deflect in rotation under those high torque moments. Thus offering additional support to the ring gear under its moments of maximum torque stress.

Originally developed in the dragracing world were momentary hi torque situations are kind of the norm, the load bold idea works equally well in any off-road application. Especially if you are a SERIOUS rock crawler, or off roader.
Load bolts are standard equipment on our Currie Extreme 60, Currie 70 and for our high horse power applications for our 9” applications as well. #techtuesday #currieequipped #currieenterprises #currie60 #currie70 #9” #fab9 #turn9
  • @currieenterprises Profile picture

    @currieenterprises

    Currie Enterprises

    What is the load bolt and why do I need it? Time for some #techtuesday!
    Well, the load bolt actually serves two purposes. First it eliminates ring gear deflection, which can be induced under moments of high torque. And, secondly it will dramatically increase your torque handling ability -

    A load bolt sits two thousandths (.002) of an inch away from the rear of the ring gear (see cut away pictures, swipe to see them all). It is manufactured to high tolerances and is made from hardened tool steel and, is set to its proper position before it is shipped.

    It is important to note that the load bolt is only in contact with the ring gear when the gear begins to deflect in rotation under those high torque moments. Thus offering additional support to the ring gear under its moments of maximum torque stress.

    Originally developed in the dragracing world were momentary hi torque situations are kind of the norm, the load bold idea works equally well in any off-road application. Especially if you are a SERIOUS rock crawler, or off roader.
    Load bolts are standard equipment on our Currie Extreme 60, Currie 70 and for our high horse power applications for our 9” applications as well. #techtuesday #currieequipped #currieenterprises #currie60 #currie70 #9#fab9 #turn9

  •  2,706  0  13 August, 2019