Latest #entered Posts
- Almost time for #TheGathering! “And #learn #this #parable #from the #fig #tree: When its branch has already become tender and puts forth leaves, you know that the summer is near. “So you also, when you see all these, know that He is near, at the doors. “Truly, I say to you, this #generation #shall by #no #means #pass #away #until #all this #takes #place. “The heaven and the earth shall pass away, but My words shall by no means pass away. “But concerning that day and the hour no one knows, not even the messengers of the heavens, but My Father only. “And as the #DaysOfNoaḥ, so also shall the #coming of the #SonOfAḏam be. For as they were in the days before the flood, eating and drinking, marrying and giving in marriage, until the day that #Noaḥ #entered into the #ark, and they did not know until the flood came and #took #them #all #away, so also shall the coming of the Son of Aḏam be.
Mattithyahu (Matthew) 24:32-39 TS2009
The Topstage Composites S14 will be one car that will be up the pointy end in the Royal Purple Unlimited class contesting for that top spot.
The car was originally Freddy Carbons University ride but evolved into the monster that it is today. From a thought , became a sketch, from a sketch became a design ......then the fun part of hand making this body from scratch began. The car runs a lot of Topstages universal products with a twist of customisation, Wing, front and rear diffusers. The rest of the design has the sole purpose of being as light, strong and functionally fast as possible . Max downforce and minimal drag are real factors.
Body, full Topstage designed and built with detachable front clip.
V3 aerodynamic front diffuser, rear diffuser, rear wing, twin vents.
Wet weight with 25 litres fuel without ballast 1008kg
Greddy easy cams
Nitto pistons and rods
Gti-r oil pump
Nitto head gasket
Martini Racing Products oil and E85 116 fuel.
Custom HyperGear ATR45SS mounted on 6boost manifolds
Wheels spec +12 18x10.5 Tyres: Yokohama Advan 050
Haltech elite 1500, and racepak gps dash cluster, installed and wired by RE Motorsport
Tuning by Trent at Chequered Tuning set at 380rwkw, whilst Kamikaze mode 420rwkw
HGT Precision Gearboxes sequential
Direct Clutch triple plate
RE motorsport Custom Fuel tank, fuel system setup.
PWR radiator and intercooler.
Custom ducting with carbon shrouds
MCA Suspension Reds
HARDRACE adjustable arms, Lower control arms, engine mounts, steering arms, and sway bars.
GK tech V2 drop knuckles front and back.
Suspension tuning by Ravage Raceworks
1:35 Phillip island
This is the last week of entries , don’t miss out, it’s going to be an awesome day with plenty of track time.
@davebro69 has had VTA on his bucket list for a few years but has unfortunately had a tough run of bad luck. It looks like he has finally turned the corner with reliability completing a few track days with minimal issues recently.
We had a quick chat to Dave......... Car is a 1996 FD RX7.
I've owned since Nov 2010.
Bought as a rolling caged shell when I lived in Adelaide, but car wasn't running until I moved to Sydney. Car had nothing. was empty shell. Had to source everything pretty much.
Built and painted entirely by me at my secret race car facility (the garage under my apartment)
Has been a slow process as money is always a factor. And breakages.
Had the car out more last year, and hopefully more this year.
13B extend port 300RW KW (406 RW HP) at 20 psi. Although I don't run this high!
GT3582 turbo. E85 fuel. Turbo smart 50mm external gate.
Stock gearbox, as I broke my Albins dog box.
Carter blue lift pump, 2 x Bosch 044 fuel pumps.
Bosch 1650 injectors x 4. All teflon braided lines. Speedflow fittings.
40L fuel cell. Surge tank. Turbo smart AFR and Haltech flex sensor.
Haltech PS1000 and Haltech IQ3 logger dash.
MCA Reds. 14kg F and 12kg R springs.
All bushes and pillow balls replaced with competition grade urethane.
Camber bushes in front.
Racing Beat front/rear
PB Racing Front 8 pot with 356mm disc.
PB Racing Rear 4 pot with 330mm disc.
Project Mu RC01 Club Racer pads.
Rota 18x10.5 +15 offset.
295x35x18 A050 softs. Few second hand sets! :) Looking forward to finally driving Phillip Island!
I know I'll be at the rear of the class, but I'm just excited to be there.
Should be fun!
Entries are still available via our website.
- 🔥GIVEAWAY🔥We’re giving away an @anovaculinary Sous Vide Precision Cooker with WiFi & Bluetooth. To enter...TAG YOUR RESTAURANT OR HOSPITALITY COMPANY in this post. Last day to enter is Sunday 3/17 by 11:59 PM pacific time. Winners will be announced Monday 3/18. Multiple entries allowed for tagging multiple restaurants. Must be a hospitality professional to win.