#enginenerd Instagram Photos & Videos

enginenerd - 575 posts

Hashtag Popularity

3.9
average comments
102.2
average likes

Latest #enginenerd Posts

  • Getting a little work in on my own car this morning. I knew it would be snug packaging a bash bar behind the bumper and in front of that @precisionturbo FMIC.

Within about 90 minutes I went from no data, to scanning, merging a front end scan, merging two bumper scans (car was on the ground), and starting on a CAD model. 
This method takes out the guess work and allows repeatable parts, drawings, and/or fixtures. I might go ahead and 3D print some cut and coping fixtures for this as a simple means of rapid production or prototyping.

#engineering #engineNerd #3dscanning #3dprinting #Solidworks #peel3d #creaform #subaru #wrx #bugeye #beater
  • Getting a little work in on my own car this morning. I knew it would be snug packaging a bash bar behind the bumper and in front of that @precisionturbo FMIC.

    Within about 90 minutes I went from no data, to scanning, merging a front end scan, merging two bumper scans (car was on the ground), and starting on a CAD model.
    This method takes out the guess work and allows repeatable parts, drawings, and/or fixtures. I might go ahead and 3D print some cut and coping fixtures for this as a simple means of rapid production or prototyping.

    #engineering #engineNerd #3dscanning #3dprinting #Solidworks #peel3d #creaform #subaru #wrx #bugeye #beater

  •  45  10  30 August, 2019
  • Today’s #tbt is back to the late 90’s or very early 2000’s when I was instructing at @samtechedu in Houston. The bullet in front of me is the 477 inch, 9000+ rpm Big Block Chevy out of the Malibu. We constantly had that engine apart changing up parts trying to improve it. ~
My favorite part of engine building is R&D. Learning from both your successes and failures alike. Machining parts to super accurate tolerances and meticulous assembly is also right up there in the fun category for me, too.....along with methodical dyno testing. ~
I will forever be a student. I seek knowledge everywhere. Sometimes knowledge comes to me in strange ways. Sometimes in disguise. It happens to everyone. If you take the time to look carefully you will understand what I mean. There are lessons to be learned in all aspects of life..and you will be surprised to draw parallels to seemingly unrelated things if you take the time to recognize them. Stay sharp, my people. Be on the lookout. Knowledge is power. ~
#engineguy #tvhost #enginebuilder #instructor #educator #gearhead #machinist #philosophy #ilovemyjob #oldschool #bigblockchevy #racebullet #becauseracecar #nerd #enginenerd #horsepower #dragracing #enginebuilding #attentiontodetail #thegoodolddays #enginegeek
  • Today’s #tbt is back to the late 90’s or very early 2000’s when I was instructing at @samtechedu in Houston. The bullet in front of me is the 477 inch, 9000+ rpm Big Block Chevy out of the Malibu. We constantly had that engine apart changing up parts trying to improve it. ~
    My favorite part of engine building is R&D. Learning from both your successes and failures alike. Machining parts to super accurate tolerances and meticulous assembly is also right up there in the fun category for me, too.....along with methodical dyno testing. ~
    I will forever be a student. I seek knowledge everywhere. Sometimes knowledge comes to me in strange ways. Sometimes in disguise. It happens to everyone. If you take the time to look carefully you will understand what I mean. There are lessons to be learned in all aspects of life..and you will be surprised to draw parallels to seemingly unrelated things if you take the time to recognize them. Stay sharp, my people. Be on the lookout. Knowledge is power. ~
    #engineguy #tvhost #enginebuilder #instructor #educator #gearhead #machinist #philosophy #ilovemyjob #oldschool #bigblockchevy #racebullet #becauseracecar #nerd #enginenerd #horsepower #dragracing #enginebuilding #attentiontodetail #thegoodolddays #enginegeek

  •  437  15  23 August, 2019
  • A highlight of my trip to #britishmotormuseum, the collection of development and experimental engines. Everything from the 2 cylinder Austin through the V8 diesel tester to a very early 70s development mule for the k series
#enginenerd #history #austinrover
  • A highlight of my trip to #britishmotormuseum, the collection of development and experimental engines. Everything from the 2 cylinder Austin through the V8 diesel tester to a very early 70s development mule for the k series
    #enginenerd #history #austinrover

  •  2  0  20 July, 2019
  • Time to revisit some things. My firehouse reading list for the next few weeks. #enginenerd
  • Time to revisit some things. My firehouse reading list for the next few weeks. #enginenerd

  •  129  1  28 February, 2019
  • Hey there, I’m Nerissa 👋
I’m 29, I live in Milwaukee, and am married with two fur kids 🐶😽 I’m also an engineer at Harley-Davidson. I first joined the company as a Design Engineer in the powertrain group and helped deliver the new Milwaukee Eight engine. Now, I work in the Calibration and Emissions team. My work involves developing and delivering engine calibrations and controls that ensure our products meet regulatory emissions, and deliver performance and driveability targets for our customers...that’s a long way of saying that I have a bomb ass job where I get to use my science and math background to develop amazing motorcycles that help people all over the world experience their own personal freedoms.
.
I have a Bachelor’s Degree in Mechanical Engineering and am hoping to start a Masters in Engineering of Engine Systems within the next year. My career has always been in some form of engine development, and I absolutely love it. I’m a total #EngineNerd
.
I am and always have been a minority in my field. I graduated as 1 of 6 girls in a class of over 200 Mechanical Engineers. Thankfully these odds are getting better over the years. But, like many amazing women in STEM who came before me, I have also found a passion in mentoring young girls to explore STEM careers. Last year, myself and a few other women engineers at H-D initiated the first all-girls’ @buildmoto team. With the help of a few other talented women around Milwaukee, we helped guide 7 high schools girls to rebuild an old CL175 into a flat tracker. The @theironangels took 3rd place in their inaugural year. Tomorrow, we officially start year 2, and I couldn’t be more excited!
.
I have found that motorcycles, the culture, and the people within it have set my soul on fire. They have helped define who I am, helped me discover my best self, and helped me realize a sense of happiness and contentment that I am truly grateful for. I have met SO many amazing and motivational people through motorcycling. Their stories, their passions, their drive, their aspirations all inspire me to do my best work. I’ve worked my ass off to get where I am today, and I have many more [cont..]
  • Hey there, I’m Nerissa 👋
    I’m 29, I live in Milwaukee, and am married with two fur kids 🐶😽 I’m also an engineer at Harley-Davidson. I first joined the company as a Design Engineer in the powertrain group and helped deliver the new Milwaukee Eight engine. Now, I work in the Calibration and Emissions team. My work involves developing and delivering engine calibrations and controls that ensure our products meet regulatory emissions, and deliver performance and driveability targets for our customers...that’s a long way of saying that I have a bomb ass job where I get to use my science and math background to develop amazing motorcycles that help people all over the world experience their own personal freedoms.
    .
    I have a Bachelor’s Degree in Mechanical Engineering and am hoping to start a Masters in Engineering of Engine Systems within the next year. My career has always been in some form of engine development, and I absolutely love it. I’m a total #EngineNerd
    .
    I am and always have been a minority in my field. I graduated as 1 of 6 girls in a class of over 200 Mechanical Engineers. Thankfully these odds are getting better over the years. But, like many amazing women in STEM who came before me, I have also found a passion in mentoring young girls to explore STEM careers. Last year, myself and a few other women engineers at H-D initiated the first all-girls’ @buildmoto team. With the help of a few other talented women around Milwaukee, we helped guide 7 high schools girls to rebuild an old CL175 into a flat tracker. The @theironangels took 3rd place in their inaugural year. Tomorrow, we officially start year 2, and I couldn’t be more excited!
    .
    I have found that motorcycles, the culture, and the people within it have set my soul on fire. They have helped define who I am, helped me discover my best self, and helped me realize a sense of happiness and contentment that I am truly grateful for. I have met SO many amazing and motivational people through motorcycling. Their stories, their passions, their drive, their aspirations all inspire me to do my best work. I’ve worked my ass off to get where I am today, and I have many more [cont..]

  •  253  33  4 December, 2018
  • Siapa yang weekend ini merimba guys? Seru loh ngikut mang @dudungsp ke hutan blusukan bersama kawan-kawan..
#staynerd 
#enginenerd
  • Siapa yang weekend ini merimba guys? Seru loh ngikut mang @dudungsp ke hutan blusukan bersama kawan-kawan..
    #staynerd
    #enginenerd

  •  38  2  17 November, 2018
  • Strange how the little things in life can bring the most Joy!
I started grinding on my first set of 
KPI /TFS highports in 1990.
Although we are still Deep In R&D these are by far the best set I have ever had the privilege of working on.
#protechracing #sbf #enginenerd#enginesaremylife #ultrastreet
  • Strange how the little things in life can bring the most Joy!
    I started grinding on my first set of
    KPI /TFS highports in 1990.
    Although we are still Deep In R&D these are by far the best set I have ever had the privilege of working on.
    #protechracing #sbf #enginenerd #enginesaremylife #ultrastreet

  •  42  1  6 November, 2018
  • Whether it's for a Monday morning or Friday night, plain trousers never fail to make an impression. Shop for more @engine.nerd on our website.
•
In Frame :
Engine Nerd - Signore Trousers Ash | IDR 375K
•
Shop our curated collection at www.maskoolin.com
•
#Maskoolin
#MenStyleInspiration
  • Whether it's for a Monday morning or Friday night, plain trousers never fail to make an impression. Shop for more @engine.nerd on our website.

    In Frame :
    Engine Nerd - Signore Trousers Ash | IDR 375K

    Shop our curated collection at www.maskoolin.com

    #Maskoolin
    #MenStyleInspiration

  •  38  1  17 September, 2018
  • Anyone ready for the weekend? Because we are with these stylish yet comfy pair of jogger jeans by @engine.nerd
•
In Frame :
Engine Nerd - Roady 2 Jogger Jeans Blue | IDR 298K
•
Shop our curated collection at www.maskoolin.com
•
#Maskoolin
#MenStyleInspiration
  • Anyone ready for the weekend? Because we are with these stylish yet comfy pair of jogger jeans by @engine.nerd

    In Frame :
    Engine Nerd - Roady 2 Jogger Jeans Blue | IDR 298K

    Shop our curated collection at www.maskoolin.com

    #Maskoolin
    #MenStyleInspiration

  •  63  7  24 August, 2018
  • [ SALE ALERT ]
•
Get up to 50% discount for Engine Nerd products on Maskoolin Payday SALE. Additional 15% with discount code MSKLNPAYDAY
•
In Frame :
Engine Nerd - Grinder Shorts Tan | IDR 186K
•

Shop our curated collection at www.maskoolin.com
•
#Maskoolin
#MenStyleInspiration
  • [ SALE ALERT ]

    Get up to 50% discount for Engine Nerd products on Maskoolin Payday SALE. Additional 15% with discount code MSKLNPAYDAY

    In Frame :
    Engine Nerd - Grinder Shorts Tan | IDR 186K


    Shop our curated collection at www.maskoolin.com

    #Maskoolin
    #MenStyleInspiration

  •  46  1  28 July, 2018
  • Facing weekend? Tone up your appearance with engine nerd short series! 
__
#enginenerd #chill #short
  • Facing weekend? Tone up your appearance with engine nerd short series!
    __
    #enginenerd #chill #short

  •  32  6  29 June, 2018
  • Mumpung cuaca lagi mendukung alias cakung, pas banget kalau jalan-jalan ke taman kota. Kalau lagi cakung gini, kalian sukanya jalan ke mana nih bro?
__
#enginenerd #short #chill
  • Mumpung cuaca lagi mendukung alias cakung, pas banget kalau jalan-jalan ke taman kota. Kalau lagi cakung gini, kalian sukanya jalan ke mana nih bro?
    __
    #enginenerd #short #chill

  •  70  2  27 June, 2018
  • Inidia salah satu isi paket dalam video yang pernah saya upload di IG story beberapa waktu lalu, yaitu Worka Jacket Olive dari @engine.nerd cocok untuk yang suka motoran.
Bisa tampil lebih jantan selain itu juga mampu membuat badan gak masuk angin mau sekencang apapun kalian gas motornya, palingan kalau salah salah gas jadi lebih dekat dengan tuhan aja.
Maka sebaiknya bawalah motor dengan santun. #enginenerd #workajacket #ridingwear 📷 : @suherman007
  • Inidia salah satu isi paket dalam video yang pernah saya upload di IG story beberapa waktu lalu, yaitu Worka Jacket Olive dari @engine.nerd cocok untuk yang suka motoran.
    Bisa tampil lebih jantan selain itu juga mampu membuat badan gak masuk angin mau sekencang apapun kalian gas motornya, palingan kalau salah salah gas jadi lebih dekat dengan tuhan aja.
    Maka sebaiknya bawalah motor dengan santun. #enginenerd #workajacket #ridingwear 📷 : @suherman007

  •  218  10  31 May, 2018
  • Buat brothers rider motor, wajib nih punya jaket ini! Cocok dipakai saat mudik nanti, mudik jadi makin keren deh! Selamat berbuka puasa, Brothers!
.
Produk: Breaker Bold Jacket
Harga: Rp 399.000 Disc 8% tinggal Rp 367.080
Sekarang produk tersebut sudah ready stock di #BrodoStore
.
.
#tosjantan #brodo #leather #madeinindonesia#jacket #enginenerd
  • Buat brothers rider motor, wajib nih punya jaket ini! Cocok dipakai saat mudik nanti, mudik jadi makin keren deh! Selamat berbuka puasa, Brothers!
    .
    Produk: Breaker Bold Jacket
    Harga: Rp 399.000 Disc 8% tinggal Rp 367.080
    Sekarang produk tersebut sudah ready stock di  #BrodoStore
    .
    .
    #tosjantan  #brodo  #leather  #madeinindonesia #jacket  #enginenerd

  •  7  0  30 May, 2018

Top #enginenerd Posts

  • Time to revisit some things. My firehouse reading list for the next few weeks. #enginenerd
  • Time to revisit some things. My firehouse reading list for the next few weeks. #enginenerd

  •  129  1  28 February, 2019
  • Today’s #tbt is back to the late 90’s or very early 2000’s when I was instructing at @samtechedu in Houston. The bullet in front of me is the 477 inch, 9000+ rpm Big Block Chevy out of the Malibu. We constantly had that engine apart changing up parts trying to improve it. ~
My favorite part of engine building is R&D. Learning from both your successes and failures alike. Machining parts to super accurate tolerances and meticulous assembly is also right up there in the fun category for me, too.....along with methodical dyno testing. ~
I will forever be a student. I seek knowledge everywhere. Sometimes knowledge comes to me in strange ways. Sometimes in disguise. It happens to everyone. If you take the time to look carefully you will understand what I mean. There are lessons to be learned in all aspects of life..and you will be surprised to draw parallels to seemingly unrelated things if you take the time to recognize them. Stay sharp, my people. Be on the lookout. Knowledge is power. ~
#engineguy #tvhost #enginebuilder #instructor #educator #gearhead #machinist #philosophy #ilovemyjob #oldschool #bigblockchevy #racebullet #becauseracecar #nerd #enginenerd #horsepower #dragracing #enginebuilding #attentiontodetail #thegoodolddays #enginegeek
  • Today’s #tbt is back to the late 90’s or very early 2000’s when I was instructing at @samtechedu in Houston. The bullet in front of me is the 477 inch, 9000+ rpm Big Block Chevy out of the Malibu. We constantly had that engine apart changing up parts trying to improve it. ~
    My favorite part of engine building is R&D. Learning from both your successes and failures alike. Machining parts to super accurate tolerances and meticulous assembly is also right up there in the fun category for me, too.....along with methodical dyno testing. ~
    I will forever be a student. I seek knowledge everywhere. Sometimes knowledge comes to me in strange ways. Sometimes in disguise. It happens to everyone. If you take the time to look carefully you will understand what I mean. There are lessons to be learned in all aspects of life..and you will be surprised to draw parallels to seemingly unrelated things if you take the time to recognize them. Stay sharp, my people. Be on the lookout. Knowledge is power. ~
    #engineguy #tvhost #enginebuilder #instructor #educator #gearhead #machinist #philosophy #ilovemyjob #oldschool #bigblockchevy #racebullet #becauseracecar #nerd #enginenerd #horsepower #dragracing #enginebuilding #attentiontodetail #thegoodolddays #enginegeek

  •  437  15  23 August, 2019
  • Hey there, I’m Nerissa 👋
I’m 29, I live in Milwaukee, and am married with two fur kids 🐶😽 I’m also an engineer at Harley-Davidson. I first joined the company as a Design Engineer in the powertrain group and helped deliver the new Milwaukee Eight engine. Now, I work in the Calibration and Emissions team. My work involves developing and delivering engine calibrations and controls that ensure our products meet regulatory emissions, and deliver performance and driveability targets for our customers...that’s a long way of saying that I have a bomb ass job where I get to use my science and math background to develop amazing motorcycles that help people all over the world experience their own personal freedoms.
.
I have a Bachelor’s Degree in Mechanical Engineering and am hoping to start a Masters in Engineering of Engine Systems within the next year. My career has always been in some form of engine development, and I absolutely love it. I’m a total #EngineNerd
.
I am and always have been a minority in my field. I graduated as 1 of 6 girls in a class of over 200 Mechanical Engineers. Thankfully these odds are getting better over the years. But, like many amazing women in STEM who came before me, I have also found a passion in mentoring young girls to explore STEM careers. Last year, myself and a few other women engineers at H-D initiated the first all-girls’ @buildmoto team. With the help of a few other talented women around Milwaukee, we helped guide 7 high schools girls to rebuild an old CL175 into a flat tracker. The @theironangels took 3rd place in their inaugural year. Tomorrow, we officially start year 2, and I couldn’t be more excited!
.
I have found that motorcycles, the culture, and the people within it have set my soul on fire. They have helped define who I am, helped me discover my best self, and helped me realize a sense of happiness and contentment that I am truly grateful for. I have met SO many amazing and motivational people through motorcycling. Their stories, their passions, their drive, their aspirations all inspire me to do my best work. I’ve worked my ass off to get where I am today, and I have many more [cont..]
  • Hey there, I’m Nerissa 👋
    I’m 29, I live in Milwaukee, and am married with two fur kids 🐶😽 I’m also an engineer at Harley-Davidson. I first joined the company as a Design Engineer in the powertrain group and helped deliver the new Milwaukee Eight engine. Now, I work in the Calibration and Emissions team. My work involves developing and delivering engine calibrations and controls that ensure our products meet regulatory emissions, and deliver performance and driveability targets for our customers...that’s a long way of saying that I have a bomb ass job where I get to use my science and math background to develop amazing motorcycles that help people all over the world experience their own personal freedoms.
    .
    I have a Bachelor’s Degree in Mechanical Engineering and am hoping to start a Masters in Engineering of Engine Systems within the next year. My career has always been in some form of engine development, and I absolutely love it. I’m a total #EngineNerd
    .
    I am and always have been a minority in my field. I graduated as 1 of 6 girls in a class of over 200 Mechanical Engineers. Thankfully these odds are getting better over the years. But, like many amazing women in STEM who came before me, I have also found a passion in mentoring young girls to explore STEM careers. Last year, myself and a few other women engineers at H-D initiated the first all-girls’ @buildmoto team. With the help of a few other talented women around Milwaukee, we helped guide 7 high schools girls to rebuild an old CL175 into a flat tracker. The @theironangels took 3rd place in their inaugural year. Tomorrow, we officially start year 2, and I couldn’t be more excited!
    .
    I have found that motorcycles, the culture, and the people within it have set my soul on fire. They have helped define who I am, helped me discover my best self, and helped me realize a sense of happiness and contentment that I am truly grateful for. I have met SO many amazing and motivational people through motorcycling. Their stories, their passions, their drive, their aspirations all inspire me to do my best work. I’ve worked my ass off to get where I am today, and I have many more [cont..]

  •  253  33  4 December, 2018
  • Swinger Bold
More Supply.
.
Kenikmatan dan kenyamanan saat bersantai seperti ini bisa didapatkan dengan menggunakan jogger berbahan terry. Swinger bold, jogger jantan dari @engine.nerd telah tersedia kembali di onlline store kami.
.
Segera dapatkan di : goo.gl/vsKbCI
.
#enginenerd #menstyle #MadeinIndonesia #tosjantan
.
Article : Swinger Bold
Harga : Rp 299.000
Line@ : @bro.do
  • Swinger Bold
    More Supply.
    .
    Kenikmatan dan kenyamanan saat bersantai seperti ini bisa didapatkan dengan menggunakan jogger berbahan terry. Swinger bold, jogger jantan dari @engine.nerd telah tersedia kembali di onlline store kami.
    .
    Segera dapatkan di : goo.gl/vsKbCI
    .
    #enginenerd #menstyle #MadeinIndonesia #tosjantan
    .
    Article : Swinger Bold
    Harga : Rp 299.000
    [email protected] : @bro.do

  •  610  6  30 March, 2017
  • Habis taraweh, siap - siap sahur on the road. Jangan lupa pake celana panjang biar gak masuk angin bro. 
Yang bosen celananya itu-itu aja, atau yang bingung ngabisin THRnya kemana.., nih ombro kasi ide. Ada banyak macam denim & pants dari @engine.nerd yang cocok untuk brothers. Langsung check bro instagramnya.. .
Oiya, sahur on the roadnya yang tertib ya bro. Being gentleman itu having a good attitude lho. ✊⚡
Semoga sahurnya berkah bro!

#brodohood #enginenerd #ridenerd #ramadhan #gentlemen
  • Habis taraweh, siap - siap sahur on the road. Jangan lupa pake celana panjang biar gak masuk angin bro.
    Yang bosen celananya itu-itu aja, atau yang bingung ngabisin THRnya kemana.., nih ombro kasi ide. Ada banyak macam denim & pants dari @engine.nerd yang cocok untuk brothers. Langsung check bro instagramnya.. .
    Oiya, sahur on the roadnya yang tertib ya bro. Being gentleman itu having a good attitude lho. ✊⚡
    Semoga sahurnya berkah bro!

    #brodohood #enginenerd #ridenerd #ramadhan #gentlemen

  •  621  3  13 June, 2016
  • Are you ready for the new articles by @engine.nerd?
.
.
Detail: Engine Nerd - Anorak Parka Jacket
.
.
Click the link in our description to see more of our jacket collection
  • Are you ready for the new articles by @engine.nerd?
    .
    .
    Detail: Engine Nerd - Anorak Parka Jacket
    .
    .
    Click the link in our description to see more of our jacket collection

  •  45  1  1 September, 2017
  • Sudah gak sabar mau riding pakai @engine.nerd? Mending pesan sekarang, Bro di : bit.ly/DenimJantan .
Oiya denim ini desainnya universal lho..jadi brother bisa pakai celana ini kemana aja dan untuk apa aja. Dijamin nyaman!
Mau tau kenapa?
Penasaran?
Pantengin terus ya instagramnya.
#ridenerd #enginenerd #ridingjantan #gentlemanride
  • Sudah gak sabar mau riding pakai @engine.nerd? Mending pesan sekarang, Bro di : bit.ly/DenimJantan .
    Oiya denim ini desainnya universal lho..jadi brother bisa pakai celana ini kemana aja dan untuk apa aja. Dijamin nyaman!
    Mau tau kenapa?
    Penasaran?
    Pantengin terus ya instagramnya.
    #ridenerd #enginenerd #ridingjantan #gentlemanride

  •  353  3  16 June, 2016
  • Ngabuburit sore ini ditemenin sama kawan - kawan Brodohood sambil nyobain @engine.nerd 
Kalian harus cobain Denimnya.. fleksibel & nyaman. Cocok banget buat riding santai sore - sore sambil nyari takjil. Awas banyak yang ngelirik..
.
.
#ridingjantan #enginenerd #denim
  • Ngabuburit sore ini ditemenin sama kawan - kawan Brodohood sambil nyobain @engine.nerd
    Kalian harus cobain Denimnya.. fleksibel & nyaman. Cocok banget buat riding santai sore - sore sambil nyari takjil. Awas banyak yang ngelirik..
    .
    .
    #ridingjantan #enginenerd #denim

  •  1,038  2  20 June, 2016
  • Jogging gets a little easier everyday. You gotta do it everyday, that’s the hard part. But it does get easier.
•
Get 43% off for this product while supplies last.
•
Detail: Engine Nerd - Swinger Ash Jogger Grey
•
Shop our curated collection at www.maskoolin.com
Also follow @maskoolin.shop to  see our latest product catalog.
•
#menstyleinspiration #whatmakesaman #joggerpants #enginenerd
  • Jogging gets a little easier everyday. You gotta do it everyday, that’s the hard part. But it does get easier.

    Get 43% off for this product while supplies last.

    Detail: Engine Nerd - Swinger Ash Jogger Grey

    Shop our curated collection at www.maskoolin.com
    Also follow @maskoolin.shop to see our latest product catalog.

    #menstyleinspiration #whatmakesaman #joggerpants #enginenerd

  •  24  0  9 October, 2017